Configuration
Function Prompt Selections or
Parameter
Lower Display
Range of Setting
Upper Display
Definition
MAX
MAX—Tuning and Setpoint Ramp parameters are
available for read only. No other parameters are
viewable.
AUTO MAN
DISABLE
ENABLE
MANUAL/AUTO KEY LOCKOUT—Allows you to
disable the Manual/Auto key
DISABLE
ENABLE
ATTENTION Can only be viewed if LOCKOUT is
configured for NONE.
RUN HOLD
DISABLE
ENABLE
RUN/HOLD KEY LOCKOUT—Allows you to disable
the Run/Hold key, for either SP Ramp or SP
Program. The Run/Hold key is never disabled when
used to acknowledge a latched alarm 1
DISABLE
ENABLE
ATTENTION Can only be viewed if LOCKOUT is
configured for NONE.
SP SEL
DISABLE
ENABLE
SETPOINT SELECT KEY LOCKOUT—Allows you
to disable the Setpoint Select key
DISABLE
ENABLE
ATTENTION Can only be viewed if LOCKOUT is
configured for NONE.
12/04 UDC3200 Universal Digital Controller Product Manual 43
To Next Page
Loading...
