163
192.168.0.0/24 20 NULL Eth1/1 10.1.1.1 R/-/-
0.0.0.0/0 10 NULL Eth1/1 10.1.1.1 R/-/-
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
[RouterC] display isis route
Route information for IS-IS(1)
-----------------------------
Level-1 IPv4 Forwarding Table
-----------------------------
IPv4 Destination IntCost ExtCost ExitInterface NextHop Flags
-------------------------------------------------------------------------------
10.1.1.0/24 10 NULL Eth1/1 Direct D/L/-
10.1.2.0/24 10 NULL Eth1/3 Direct D/L/-
192.168.0.0/24 10 NULL Eth1/2 Direct D/L/-
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
Level-2 IPv4 Forwarding Table
-----------------------------
IPv4 Destination IntCost ExtCost ExitInterface NextHop Flags
-------------------------------------------------------------------------------
10.1.1.0/24 10 NULL Eth1/1 Direct D/L/-
10.1.2.0/24 10 NULL Eth1/3 Direct D/L/-
192.168.0.0/24 10 NULL Eth1/2 Direct D/L/-
172.16.0.0/16 20 NULL Eth1/2 192.168.0.2 R/-/-
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
[RouterD] display isis route
Route information for IS-IS(1)
-----------------------------
Level-2 IPv4 Forwarding Table
-----------------------------
IPv4 Destination IntCost ExtCost ExitInterface NextHop Flags
-------------------------------------------------------------------------------
192.168.0.0/24 10 NULL Eth1/2 Direct D/L/-
10.1.1.0/24 20 NULL Eth1/2 192.168.0.1 R/-/-
10.1.2.0/24 20 NULL Eth1/2 192.168.0.1 R/-/-
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
3. Configure RIPv2 on Router D and Router E, and configure IS-IS to redistribute RIP routes on Router
D:
To Next Page
Loading...
Need help?
General