53
[RouterC-rip-1] version 2
[RouterC-rip-1] undo summary
[RouterC-rip-1] network 192.168.2.0
[RouterC-rip-1] network 192.168.4.0
[RouterC-rip-1] network 100.1.1.0
[RouterC-rip-1] peer 192.168.1.1
[RouterC-rip-1] undo validate-source-address
[RouterC-rip-1] import-route static
[RouterC-rip-1] quit
[RouterC] interface ethernet 1/1
[RouterC-Ethernet1/1] rip bfd enable
[RouterC-Ethernet1/1] quit
# Configure Router D.
<RouterD> system-view
[RouterD] rip 1
[RouterD-rip-1] version 2
[RouterD-rip-1] undo summary
[RouterD-rip-1] network 192.168.3.0
[RouterD-rip-1] network 192.168.4.0
[RouterD-rip-1] quit
3. Configure BFD parameters for the interfaces:
# Configure Router A.
[RouterA] bfd session init-mode active
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ip address 192.168.3.1 24
[RouterA-Ethernet1/1] quit
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] ip address 192.168.1.1 24
[RouterA-Ethernet1/2] bfd min-transmit-interval 500
[RouterA-Ethernet1/2] bfd min-receive-interval 500
[RouterA-Ethernet1/2] bfd detect-multiplier 7
[RouterA-Ethernet1/2] quit
# Configure Router B.
<RouterB> system-view
[RouterB] interface ethernet 1/2
[RouterB-Ethernet1/2] ip address 192.168.1.2 24
[RouterB-Ethernet1/2] quit
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ip address 192.168.2.1 24
# Configure Router C.
[RouterC] bfd session init-mode active
[RouterC] interface ethernet 1/1
[RouterC-Ethernet1/1] ip address 192.168.2.2 24
[RouterC-Ethernet1/1] bfd min-transmit-interval 500
[RouterC-Ethernet1/1] bfd min-receive-interval 500
[RouterC-Ethernet1/1] bfd detect-multiplier 6
[RouterC-Ethernet1/1] quit
To Next Page
Loading...
