Assembly
Access
4-37
All
subassemblies listed above require that the printer
be
removed from the computer. To remove
the printer from the computer proceed as follows:
1.
UNPLUG COMPUTER POWER CORD FROM
AC
OUTLET.
2.
Remove front cover as previously described.
3. Disconnect ground cable connector from lug
on
computer (Figure 4-34).
*
#2
POZIDRIV SCREW * (HIDDEN)
* GROUND CABLE CONNECTOR
Figure 4-34. Releasing Printer
4. Loosen two
#2
Pozidriv screws that attach printer to computer (Figure 4-34).
5. Grasp printer (Figure 4-35)
and
lift
printer
up
and
out of computer.
Figure 4-35. Removing Printer
To Next Page
Loading...
