4-88 Assembly Access
CRT N oke Assembly Installation
CAUTION
WHEN HANDLING THE CRTNOKE ASSEMBLY, DO NOT TOUCH
THE AREA AROUND THE YOKE. HANDLE ONLY BY CRT (BOT-
TLE) PART OF THE ASSEMBLY. YOKE ADJUSTMENTS ARE
MADE AT THE
FACTORY AND
ARE
EXTREMELY DELICATE.
1.
Wrap degaussing cable around replacement CRT/yoke assembly exactly as shown
in
Figures
4-92
and
4-93.
CABLE MUST
CROSS AS SHOWN
BOTTOM OF CRT
Figure 4-92. Preparing Degaussing Cable
To Next Page
Loading...
