HP 9020 - Page 221

Error Messages C-3
Indicates
Table C-l lists all error codes by device address (DA) and subaddress (SA), and defines them.
Action
Determined by definitions in Table C-l.
Table C-l. Self Test Error 1 Error Codes
Error
DA
SA
Code
Definition
Display
0
00000001 Status line not asserted
0
00000002 Flag line not asserted
0
00000003 FRO failed loop back
0
00000004 Weasel chip failed self test
0
00000005 FR8 failed loopback
0
00000006 FR9 failed loop back
0
00000007 FR 1 0 failed loopback
0
00000008 FR12 failed loopback
0
00000009 FR 1 failed loopback
0
OOOOOOOA
Poll response asserted but not enabled
0
OOOOOOOB Poll response not asserted when enabled
0
OOOOOOOC Failed frame buffer memory test
0
OOOOOOOD Failed space substitution test
0
OOOOOOOE Failed display interrupt test
0
OOOOOOOF
Failed synchronous startup test
0
00000010 Failed window test
0
00000011
Failed reset test
0
00000012
Timed out while waiting for interrupt
0
00000013
Status false during frame buffer transfer
0
00000014 Timed out while waiting for DMA transfer
1
00000001
Status line not asserted
1
00000002 Flag line asserted when graphics disabled
1
00000003
Poll line asserted but not enabled
1
00000004
Flag line not asserted when graphics enabled
1
00000005
Poll line not asserted when graphics enabled
1
00000006
Graphics memory failure
1
00000007 Rubber band memory failure
1
00000008 Failed line drawing test
1
00000009 Erase memory failure
1
OOOOOOOA Flag timeout while writing FR1
1
OOOOOOOB Flag timeout while writing FRO
1
OOOOOOOC Flag timeout while reading FRO
1
OOOOOOOD
Timed out while waiting for DMA termination