To Next Page

To Previous Page

Configuring Secure Shell (SSH)

Further Information on SSH Client Public-Key Authentication

The babble option converts the key data to phonetic

hashes that are easier for visual comparisons.

The fingerprint option converts the key data to hexadec-

imal hashes that are for the same purpose.

The keylist-str selects keys to display (comma-delimited

list).

The manager option allows you to select manager public

keys

The operator option allows you to select operator public

keys.

Note Beginning with software release K_12_XX or later, copy usb pub-key file can

also be used as a method for copying a public key file to the switch.

For example, if you wanted to copy a client public-key file named clientkeys.txt

from a TFTP server at 10.38.252.195 and then display the file contents:

Key Index Number

Figure 7-14. Example of Copying and Displaying a Client Public-Key File Containing Two Different Client

Public Keys for the Same Client

Replacing or Clearing the Public Key File. The client public-key file

remains in the switch’s flash memory even if you erase the startup-config file,

reset the switch, or reboot the switch.

■ You can remove the existing client public-key file or specific keys by

executing the clear crypto public-key command. This clears the public keys

from both management modules. The module that is not active must be

in standby mode.

7-27

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General