To Next Page

To Previous Page

Configuring Secure Socket Layer (SSL)

Configuring the Switch for SSL Operation

To generate a self signed host certificate from the web browser interface:

i. Proceed to the Security tab then the SSL button. The SSL config-

uration screen is split up into two halves. The left half is used in

creating a new certificate key pair and (self-signed / CA-signed)

certificate. The right half displays information on the currently

installed certificate.

ii. Select the Generate Certificate button.

iii. Select Self signed certificate in the type box.

iv. Select the RSA key size desired. If you do not wish to generate a

new key then just select current from the list.

v. Fill in remaining certificate arguments (refer to “To Generate or

Erase the Switch’s Server Certificate with the CLI” on page 8-9).

vi. Click on the

[Apply Changes] button to generate a new certificate and

key if selected.

Note When generating a self-signed host certificate, if no key is present and the

current option is selected in the RSA key size box and error will be generated.

New key generation can take up to two minutes if the key queue is empty.

8-13

Other manuals for HP PROCURVE 2910AL

Questions and Answers:

Need help?

Do you have a question about the HP PROCURVE 2910AL and is the answer not in the manual?

General