address_ipv6
■ snmp-server host IPV6-ADDR
IPv6 address of SNMP notication host.
Next Available Options:
■ community -- Name of the SNMP community (up to 32 characters). (ASCII-STR) (p. 615)
■ informs -- Specify if informs will be sent, rather than notifications.(p. 618)
■ events < None | Debug | All | ... > -- (p. 616)
arp-protect
■ [no] snmp-server enable traps arp-protect
Traps for Dynamic ARP Protection.
auth-server-fail
■ [no] snmp-server enable traps auth-server-fail
Traps reporting authentication server unreachable.
community
■ [no] snmp-server community COMMUNITY
Usage: [no] snmp-server community ASCII-STR
[manager|operator] [restricted|unrestricted]
Description: Add/delete SNMP community.
Parameters:
o community ASCII-STR - Enter up to 32 characters to name an SNMP
community.
o <manager|operator> - manager - the community can access all MIB
objects; operator (default) - the community can access all except
the CONFIG MIB.
o <restricted|unrestricted> - unrestricted - any MIB variable that
has read/write access can be set; restricted (default) - MIB
variables cannot be set, only read.
Next Available Options:
■ view < Operator | Manager > -- Add/delete SNMP community(p. 622)
■ write-access < Restricted | Unrestricted | | ... > -- Add/delete SNMP community(p. 622)
■ snmp-server host IP-ADDR COMMUNITY
Name of the SNMP community (up to 32 characters).
■ snmp-server host IPV6-ADDR COMMUNITY
Name of the SNMP community (up to 32 characters).
615© 2009 Hewlett-Packard Development Company, L.P.
snmp-serverCommand Line Interface Reference Guide
To Next Page
Loading...
