For more information, see the user guide on the Hewlett Packard Enterprise website.
Controller State: The controller cannot be configured. CACHE STATUS PROBLEM
DETECTED
Symptom
Controller State: The controller cannot be configured. CACHE STATUS PROBLEM DETECTED: The cache
on this controller has a problem. To prevent data loss, configuration changes to this controller are not allowed.
Please replace the cache to be able to continue to configure this controller.
Cause
The cache module has failed.
Action
Replace the cache module.
For more information, see the maintenance and service guide on the Hewlett Packard Enterprise website.
Controller State: The HBA does not have an access ID
Symptom
Controller State: The HBA does not have an access ID. External SCSI array controllers that support SSP
require HBAs to have an access ID.
Cause
The HBA does not have an access ID.
Action
1. Upgrade the HBA.
For more information, see "Keeping the system current" in the HPE ProLiant Gen9 Troubleshooting Guide,
Volume I on the Hewlett Packard Enterprise website.
2. If the issue persists, contact Hewlett Packard Enterprise support.
For more information, see "Accessing Hewlett Packard Enterprise support."
Drive Offline due to Erase Operation: The logical drive is offline from having an erase in
progress
Symptom
Drive Offline due to Erase Operation: The logical drive is offline from having an erase in progress.
Cause
An erase operation is in progress.
Action
No action is required.
18 Controller State: The controller cannot be configured. CACHE STATUS
PROBLEM DETECTED
To Next Page
Loading...
