HPE ProLiant Gen9

• “The Smart Array firmware is reporting that no additional details are
available”
• “The Smart Array firmware is reporting that the redundant cabling configuration
on the controller has a mix of storage boxes with and without redundant I/O
modules”
• “The Smart Array firmware is reporting that a redundant I/O paths exist due to
direct loopback of the controller ports”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box are not cabled for good fault tolerance”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box have multiple paths to the controller”
Message ID: 24617
Severity: Warning
Log message: Array controller <controller name / slot information> is reporting
that an unsupported configuration has occurred with the redundant cabling that
is attached to port <port number>. <firmware information>. Please check the
cabling and ensure that a supported configuration is being used.
<firmware information> values:
• “The Smart Array firmware is reporting that no additional details are
available”
• “The Smart Array firmware is reporting that the redundant cabling configuration
on the controller has a mix of storage boxes with and without redundant I/O
modules”
• “The Smart Array firmware is reporting that a redundant I/O paths exist due to
direct loopback of the controller ports”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box are not cabled for good fault tolerance”
• “The Smart Array firmware is reporting that the redundant I/O modules of this
box have multiple paths to the controller”
Message ID: 24618
Severity: Warning
Log message: Array controller <controller name / slot information> is reporting
that an unsupported configuration has occurred with the redundant cabling that
is attached to port <port number>. Please check the cabling and ensure that a
supported configuration is being used.
Message ID: 24619
Severity: Informational
Log message: Fan number <fan number> in box <box number> was <inserted / removed>.
Box <box number> is attached to port <port number> of array controller
<controller name / slot information>.
Message ID: 24620
HPE Smart Array errors 185