HPE ProLiant Gen9

Log message: Array controller <controller name / slot information> is reporting
excessive correctable PCI-e errors. Please check this controller to ensure it is
functioning properly.
Message Id: 24628
Severity: Informational
Log message: Fan module <fan module number> in box <box number> was <inserted /
removed>. Box <box number> is attached to port <port number> of array controller
<controller name / slot information>.
Message Id: 24629
Severity: Error
Log message: Fan module <fan module number> in box number <box number> is reporting
a failure. Box number <box number> is connected to port <port number> of array
controller <controller name / slot information>. The controller may attempt to
shut down the power to the storage device and/or spin down the installed disk
drive(s).
Message Id: 24630
Severity: Informational
Log message: A tape drive connected to port <port number> of array controller
<controller name / slot information> has been <inserted / removed>.
Message Id: 24631
Severity: Informational
Log message: Fan module <fan module number> in box number <box number> is reporting
a degraded condition. Box number <box number> is connected to port <port number>
of array controller <controller name / slot information>.
Message Id: 24632
Severity: Informational
Log message: Array controller <controller name / slot information> has reported
that its cache has been disabled.
Message Id: 24633
Severity: Informational
Log message: Array controller <controller name / slot information> has reported
that its cache has been enabled.
Message Id: 24634
Severity: Informational
Log message: Array controller <controller name / slot information> has reported
that its cache batteries are missing.
Message Id: 24635
Severity: Warning
Log message: Array controller <controller name / slot information> has reported
that its cache batteries have failed.
Message Id: 24636
Severity: Informational
HPE Smart Array errors 187