For more information, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website.
Drive Offline due to Erase Operation: The physical drive is offline and the erase process
has completed
Symptom
Drive Offline due to Erase Operation: The physical drive is offline and the erase process has completed. The
drive may now be brought online through the re-enable erased drive command in SSA.
Cause
The erase process completed.
Action
Re-enable the physical drive using HPE SSA.
For more information, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website.
Drive Offline due to Erase Operation: The physical drive is offline from having an erase in
progress
Symptom
Drive Offline due to Erase Operation: The physical drive is offline from having an erase in progress.
Cause
An erase operation is in progress.
Action
No action is required.
The logical drive containing this physical drive cannot be migrated or extended while the erase operation is in
progress.
Failed Array Controller: code:(lockup Code): Restart the server and run a diagnostic report
Symptom
Failed Array Controller: code:(lockup Code): Restart the server and run a diagnostic report. Install the latest
version of controller firmware. If the condition persists, the controller may need to be replaced or require
service.
Solution 1
Cause
The controller does not have the latest firmware.
Action
Update the server to the latest firmware.
20 Drive Offline due to Erase Operation: The physical drive is offline and the
erase process has completed
To Next Page
Loading...
