HPE ProLiant Gen9 - Page 21

For more information, see "Keeping the system current" in the HPE ProLiant Gen9 Troubleshooting Guide,
Volume I on the Hewlett Packard Enterprise website.
Solution 2
Cause
An issue exists with the controller, as specified on the diagnostic report.
Action
1. Reboot the server.
2. Run the diagnostics report and take appropriate action as indicated.
3. If the issue persists, replace the controller.
4. If the issue persists, contact Hewlett Packard Enterprise support.
For more information, see "Accessing Hewlett Packard Enterprise support."
Solution 3
Cause
The controller has failed.
Action
1. Replace the controller.
2. If the issue persists, contact Hewlett Packard Enterprise support.
For more information, see "Accessing Hewlett Packard Enterprise support."
Logical drive state: A logical drive is configured with a newer version of Storage/Config
Mod than is currently running
Symptom
Logical drive state: A logical drive is configured with a newer version of Storage/Config Mod than is currently
running.
Cause
An older version of HPE SSA is installed.
Action
Obtain the latest version of HPE SSA.
Logical drive state: A logical drive is configured with a newer version of
Storage/Config Mod than is currently running 21