HPE ProLiant Gen9 - Page 22

For more information, see "Keeping the system current" in the HPE ProLiant Gen9 Troubleshooting Guide,
Volume I on the Hewlett Packard Enterprise website.
Logical drive state: Background parity initialization is currently queued
Symptom
Logical drive state: Background parity initialization is currently queued or in progress on this logical drive. If
background parity initialization is queued, it will start when I/O is performed on the drive. When background
parity initialization completes, the performance of the logical drive will improve.
Cause
Background parity initialization is currently queued or is in progress.
Action
No action is required.
Logical drive state: The current array controller is performing capacity expansion,
extension, or migration on this logical drive
Symptom
Logical drive state: The current array controller is performing capacity expansion, extension, or migration on
this logical drive.
Cause
Capacity expansion, extension, or migration is in progress.
Action
No action is required.
Further configuration is disabled until the process completes.
Logical drive state: The logical drive is disabled from a SCSI ID conflict
Symptom
Logical drive state: The logical drive is disabled from a SCSI ID conflict.
Cause
A conflict with an existing SCSI ID exists.
Action
Check all SCSI components to make sure they all have a unique SCSI ID.
Logical drive state: The logical drive is not configured
Symptom
Logical drive state: The logical drive is not configured.
22 Logical drive state: Background parity initialization is currently queued