237 The requested device is not ready.
238 Power off or remove the partner blade.
239 The current firmware does not support this operation.
240 Serial number update requires newer firmware version.
241 The requested device is not present or no firmware upgrade is required.
242 The operation cannot be performed on the requested device.
243 iLO license information cannot be retrieved because iLO XML Reply is disabled.
244 SSH is disabled on this blade.
245 Disconnect the virtual media applet.
246 Invalid SNMP Write Community string.
247 Invalid SNMP Read Community string.
248 Invalid port number. The LDAP server SSL port can be any number between 1 and 65535.
249 Feb 29 was specified but the year is not a leap year.
250 The CA certificate is invalid.
251 Exceeded the maximum number of CA certificates.
252 No CA certificates are imported.
253 This CA certificate is already imported.
254 A certificate is already mapped to this user.
255 An undocumented error has occurred. Please update your firmware to the latest firmware version if
necessary. Contact Hewlett Packard Enterprise if the problem persists.
256 This certificate is already mapped to another user.
257 The user certificate could not be verified.
258 This operation is not permitted when two-factor authentication is enabled.
260 This operation cannot be performed when AlertMail is disabled.
261 This operation cannot be performed when the AlertMail settings are not configured.
262 This operation cannot be performed when SNMP is disabled.
263 A certificate must be mapped to Administrator or LDAP must be enabled with a configured groups with
administrator privilege to enable two-factor authentication.
265 A certificate is not mapped to this user account.
266 Two-factor authentication is in effect.
267 Two-factor authentication configuration was not changed.
268 An iLO image is already staged.
269 The file was not a proper iLO image for the blade.
270 The crc32 supplied does not match the provided file.
271 Cannot delete the last CA with two-factor authentication enabled.
272 The Onboard Administrator cannot communicate with iLO.
273 An EBIPA configuration error occurred.
274 Link Loss Failover intervals must be between 30 and 86400 seconds.
275 Network speed must be either 10Mbit or 100Mbit.
HPE Onboard Administrator errors 231
To Next Page
Loading...
