HPE ProLiant Gen9 - Page 27

Action
Replace the physical drive with a drive supported by the controller. To locate a supported option, review the
product QuickSpecs on the Hewlett Packard Enterprise website.
Physical Drive State: The data on the physical drive is being rebuilt
Symptom
Physical Drive State: The data on the physical drive is being rebuilt.
Cause
The data on the physical drive is being rebuilt.
Action
No action is required. Normal operations can occur; however, performance will be less than optimal during the
rebuilding process.
Physical Drive State: This drive contains unsupported configuration data
Symptom
Physical Drive State: This drive contains unsupported configuration data. It cannot be used for configuration
and should be disconnected from this controller.
Cause
The drive is not supported.
Action
Replace the physical drive with a drive supported by the controller. To locate a supported option, review the
product QuickSpecs on the Hewlett Packard Enterprise website.
Physical Drive State: This drive is not supported for configuration by this version of
controller firmware
Symptom
Physical Drive State: This drive is not supported for configuration by this version of controller firmware.
Cause
The controller firmware version does not support the drive.
Physical Drive State: The data on the physical drive is being rebuilt 27