HPE ProLiant Gen9 - Page 279

• The Cause string indicates why an object transitioned to the current managed state from the specific
objects perspective. A network failure is an example Cause string.
• The RootCause string indicates the root causes for an object transitioning managed states. The
RootCause for a network failure could indicate all uplink ports of the network have failed.
• The ReasonCode provides an object-specific reason for the managed state transition. The reason codes
are unique between objects, allowing more specific actions to be taken programmatically from SNMP
management stations.
vcDomainManagedStatusChanged
The following is an example of a domain Cause string:
2 of 7 profiles contain unmapped connections in the domain
The following is an example of a domain RootCause string:
Modules not redundantly connected, failure of module enc0:iobay1 or enc0:iobay2
or enc1:iobay2 will isolate some modules; Port enc0:iobay5:d3:v1 loop detected
and automatically disabled
The domain managed status ReasonCodes are provided in the following table.
Domain reason code Description
vcDomainOk All enclosures and profiles are normal in the domain.
vcDomainAbnormalEnclosuresAndProfiles One or more enclosures and profiles are abnormal in
the domain.
vcDomainSomeEnclosuresAbnormal At least one enclosure is not OK or Degraded.
vcDomainUnmappedProfileConnections The profile contains connections that are not mapped
to a server port.
vcDomainStackingFailed All stacking links between one or more modules have
failed.
vcDomainStackingNotRedundant Some stacking links between one or more modules
have failed, but connectivity still exists between
modules.
vcDomainSomeProfilesAbnormal One or more profiles in the domain are abnormal.
vcDomainUnknown The condition of the domain cannot be determined.
vcDomainOverProvisioned More than 16 VC modules are in the domain.
vcDomainSflowIndirectlyDisabled sFlow is indirectly disabled by the VCEM.
vcDomainSflowFailed The sFlow network state is failed or Enet modules
have sFlow IP address issues.
vcDomainSflowDegraded The sFlow network state is degraded or Enet
modules have sFlow IP address issues.
vcDomainPortMonitorIndirectlyDisabled PortMonitor is indirectly disabled by the VCEM.
Table Continued
HPE Virtual Connect errors 279