HPE ProLiant Gen9 - Page 280

Domain reason code Description
vcDomainMixedTAA Mix of TAA and Non-TAA compliant of one or more
HP VC FlexFabric-20/40 F8 Module or HP VC 16Gb
24-Port FC Module in or across enclosures in
vcDomain.
vcDomainInvalidPXEBootOrderProfileConnection Domain configured with unsupported PXEBootOrder
ethernet connection.
vcEnclosureManagedStatusChanged
The following is an example of an enclosure Cause string:
2 of 6 Ethernet modules are abnormal in enclosure enc0
The following is an example of an enclosure RootCause string:
Module in bay enc0:iobay3 has been removed
The enclosure managed status ReasonCodes are provided in the following table.
Enclosure reason code Description
vcEnclosureOk The enclosure is normal.
vcEnclosureAllEnetModulesFailed All Ethernet modules are abnormal, none are OK or
degraded.
vcEnclosureSomeEnetModulesAbnormal One or more Ethernet modules are abnormal.
vcEnclosureSomeModulesOrServersIncompatible The enclosure contains incompatible modules, or
configured modules are missing.
vcEnclosureSomeFcModulesAbnormal One or more FC modules are abnormal.
vcEnclosureSomeServersAbnormal At least one server is in a known state and no
servers are OK, or at least one server is degraded.
vcEnclosureUnknown The condition of the enclosure cannot be
determined, or the state of servers or modules is
unknown.
vcEnclosureMixedTAAModules The enclosure contains a mix of TAA compliant and
non-TAA compliant interconnect modules.
vcModuleManagedStatusChanged
The following is an example of a module Cause string:
Port enc0:iobay5:d3:v1 loop detected and automatically disabled
The following is an example of a module RootCause string:
Port enc0:iobay5:d3:v1 loop detected and automatically disabled
The module managed status ReasonCodes are provided in the following table.
Module reason code Description
vcEnetmoduleOk The Ethernet module is functioning normally.
vcEnetmoduleEnclosureDown The module is unable to communicate with the
enclosure/OA.
Table Continued
280 HPE Virtual Connect errors