HPE ProLiant Gen9

FC fabric reason code Description
vcFabricOk The fabric is functioning normally.
vcFabricNoPortsConfigured The fabric does not have any uplink port configured.
vcFabricSomePortsAbnormal Some uplink ports for the fabric are in an abnormal
condition.
vcFabricAllPortsAbnormal All uplink ports for the fabric are in an abnormal
condition.
vcFabricWwnMismatch A WWN mismatch condition has been detected.
vcFabricUnknown The condition of the fabric is unknown.
vcEnetNetworkManagedStatusChanged
The following is an example of an Ethernet network Cause string:
Network BLUE has failed
The following is an example of an Ethernet network RootCause string:
Port enc0:iobay5:X3 is unlinked; Port enc0:iobay5:X4 is incompatible
The Ethernet network managed status ReasonCodes are provided in the following table.
Ethernet network reason code Description
vcNetworkOk The network is functioning normally.
vcNetworkUnknown The condition of the network is unknown.
vcNetworkDisabled The network is disabled.
vcNetworkAbnormal The condition of the network is abnormal.
vcNetworkFailed The network is in a failed condition.
vcNetworkDegraded The network is in a degraded condition.
vcNetworkNoPortsAssignedToPrivateNetwork No ports have been assigned to the private network.
vcProfileManagedStatusChanged
The following is an example of a profile Cause string:
3 TCServer profile connections for server in bay enc0:devbay3 are not mapped
The following is an example of a profile RootCause string:
The TelecomServer profile is assigned to an abnormal server in bay enc0:devbay1
The profile managed status ReasonCodes are provided in the following table.
Profile reason code Description
vcProfileOk The profile is normal.
vcProfileServerAbnormal The server the profile is assigned to is abnormal.
vcProfileAllConnectionsFailed All connections in the profile have failed.
vcProfileSomeConnectionsUnmapped One or more connections in the profile are not
mapped to a physical port.
Table Continued
282 HPE Virtual Connect errors