HPE ProLiant Gen9

Event log display Event log explanation
Active Health System logging hardware enabled The Active Health System was enabled in hardware.
Added group [group name] by: [user name] The listed directory group was added by the listed
user.
AlertMail modified by: [user name] The AlertMail settings were modified by the listed
user.
AlertMail sent to: [user name] An AlertMail has been sent to the listed user.
APO: iLO attempting to power-on the system iLO attempted to power on the system according to
the Auto Power On settings.
APO: Last power state restored The Auto Power On setting was set to restore the
last power state when the power to the system was
restored.
APO: Restored power state to standby The system power has been restored to the standby
state according to the Auto Power On settings.
APO: Settings modified by: [user name] The Auto Power On settings were modified by the
listed user.
APO: System configured to always remain off after
power was restored
The Auto Power On setting was set to remain off
after the power to the system was restored.
Asset tag changed by: [user name] The server asset tag was modified by the listed user.
Attempting to install language pack [name] iLO attempted to install the given language pack.
BMC IPMI iLO: [event message] BMC IPMI events
BMC IPMI Watchdog Timer Timeout: [details] BMC IPMI Watchdog Timer timed out with the listed
details.
Brown-out: recovery The system was recovered from brown-out.
Brown-out: System configured to always remain off
after power was restored
The system brown-out recovery did not occur
because the system was configured to remain off
after the power was restored.
Browser login failure from: [IP address and DNS
name]
An attempt to login to the iLO web user interface has
failed. The login request came from the listed IP
address and DNS name.
Browser login: [user name] - [IP address and DNS
name]
The listed user logged in to iLO via the web user
interface from the listed IP address and DNS name.
Browser logout: [user name] - [IP address and DNS
name]
The listed user logged out of iLO via the web user
interface from the listed IP address and DNS name.
Certificate Warning: Subject [certificate subject] does
not match server name [server name]
The connection between iLO and the listed server
was not secure because the server name did not
match the server's SSL certificate.
Default language settings modified by: [user name] The default language settings were modified by the
listed user.
Deleted group [group name] by: [user name] The listed directory group was deleted by the listed
user.
Deleted user: [user name] The listed user account was deleted.
Table Continued
HPE iLO messages, traps, and errors 303