HPE ProLiant Gen9 - Page 312

Status number Error message
0x0008
Cannot modify user. The login/ user
name already exists.
0x0009
Cannot delete user information for
currently logged user.
0x000A
User login name was not found.
0x000B
User information is open for read-only
access. Write access is required for
this operation.
0x000C
Server information is open for read-
only access. Write access is required
for this operation.
0x000D
iLO information is open for read-only
access. Write access is required for
this operation.
0x000E
Rack information is open for read-only
access. Write access is required for
this operation.
0x000F
Directory information is open for read-
only access. Write access is required
for this operation.
0x0010
Internal error. Unknown RIB action.
0x0011
Internal error. Unknown SERVER action.
0x0012
Virtual Power Button feature is not
supported or not enabled on this
server.
0x0013
Virtual Power Button cable is attached.
0x0014
Virtual Power Button cable is either
not attached or not supported.
0x0015
The IP address specified is not valid.
0x0016
The firmware image file is not valid.
0x0017
A valid firmware image has not been
loaded.
0x0018
The flash process could not be started.
0x0019
The Remote Insight Board Firmware is
being updated. The board will be reset
after the operation.
0x001A
The Remote Insight Board is being
reset.
0x001B
The server is being reset.
0x001C
The Integrated Lights-Out Event Log is
being cleared.
Table Continued
312 HPE iLO messages, traps, and errors