HPE ProLiant Gen9 - Page 313

Status number Error message
0x001D
No image present in the Virtual Floppy
drive.
0x001E
An invalid virtual floppy option has
been given.
0x001F
Failed to allocate virtual floppy image
space.
0x0020
The Virtual Floppy image is invalid.
0x0021
The key parameter specified is not
valid.
0x0022
The SESSION TIMEOUT value specified is
greater the maximum value allowed, 120.
0x0023
User does NOT have correct privilege
for action. ADMIN_PRIV required.
0x0024
User does NOT have correct privilege
for action. RESET_SERVER_PRIV required.
0x0025
User does NOT have correct privilege
for action. UPDATE_ILO_PRIV required.
0x0026
User does NOT have correct privilege
for action. CONFIG_ILO_PRIV required.
0x0027
User does NOT have correct privilege
for action. CLEAR_LOGS_PRIV required.
0x0028
User does NOT have correct privilege
for action. CONFIG_RACK_PRIV required.
0x0029
User does NOT have correct privilege
for action. VIRTUAL_MEDIA_PRIV
required.
0x002A
Server is NOT a rack server; Rack
commands do not apply.
0x002B
Minimum password length value exceeded.
0x002C
Unable to allocate memory for parser.
0x002D
Unable to allocate memory from memory
pool.
0x002E
License key error.
0x002F
License is already active.
0x0030
Login is currently being delayed.
0x0031
A firmware update is already in
progress.
0x0032
LENGTH does not match post-translated
length of VALUE.
0x0033
Problem manipulating EV.
Table Continued
HPE iLO messages, traps, and errors 313