HPE ProLiant Gen9

For more information, see the maintenance and service guide on the Hewlett Packard Enterprise website.
Smart SSD State: SSD has less than an estimated 56 days before it reaches the maximum
usage limit for writes (wearout)
Symptom
Smart SSD State: SSD has less than an estimated 56 days before it reaches the maximum usage limit for
writes (wearout) and should be replaced as soon as possible.
Cause
The drive will soon reach the maximum limit for wearout.
Action
Replace the SSD as soon as possible.
For more information, see the maintenance and service guide for your product on the Hewlett Packard
Enterprise website.
Smart SSD State: SSD has reached the maximum rated usage limit for writes (wearout) and
should be replaced immediately
Symptom
Smart SSD State: SSD has reached the maximum rated usage limit for writes (wearout) and should be
replaced immediately.
Cause
The SSD has reached the limit for wearout.
Action
Replace the SSD immediately.
For more information, see the maintenance and service guide for your product on the Hewlett Packard
Enterprise website.
Smart SSD State: The SmartSSD Wear Gauge log is full
Symptom
Smart SSD State: The SmartSSD Wear Gauge log is full. Wear Gauge parameters are not available.
Cause
The SmartSSD Wear Gauge log is full.
Action
SSD wearout cannot be monitored. If wearout must be monitored, replace the drive.
Smart SSD State: SSD has less than an estimated 56 days before it reaches
the maximum usage limit for writes (wearout) 33