Log Severity: Error (3)
Event Title: Storage System Temperature Failure.
Log Message: The %6 %7 storage system connected to SCSI bus %5 of the controller in slot %4 has a failed
temperature status. Shut down the storage system as soon as possible.
SNMP Trap: cpqSs3TempFailed - 8009 in CPQSTSYS.MIB
Symptom: Storage System temperature failure. The agent has detected that a temperature status has been
set to failed. The storage system is shut down.
User Action: Shut down the storage system as soon as possible. Insure that the storage system environment
is being cooled properly and that no components are overheated.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsBoxTempStatus
Supporting SNMP Trap Description: “Storage System will be shut down.”
NT Event ID: 1077 (Hex)0x84350435 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Temperature Degraded.
Log Message: The %6 %7 storage system connected to SCSI bus %5 of the controller in slot %4 system has
a temperature outside the normal operating range.
SNMP Trap: cpqSs3TempDegraded - 8010 in CPQSTSYS.MIB
Symptom: Storage System temperature degraded. The agent has detected a temperature status that has
been set to degraded. The storage system's temperature is outside of the normal operating range.
User Action: Shut down the storage system as soon as possible. Be sure that the storage system
environment is being cooled properly and that no components are overheated.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsBoxTempStatus
Supporting SNMP Trap Description: “Temp is outside of normal range.”
NT Event ID: 1078 (Hex)0x44350436 (cpqstmsg.dll)
Log Severity: Information (1)
Event Title: Storage System Temperature OK.
Log Message: The temperature in the %6 %7 storage system connected to SCSI bus %5 of the controller in
slot %4 has returned to the normal operating range.
SNMP Trap: cpqSs3TempOk - 8011 in CPQSTSYS.MIB
Symptom: Storage System temperature OK. The temperature status has been set to OK. The storage
system's temperature has returned to normal operating range. It may be reactivated by the administrator.
User Action: None.
Supporting SNMP Trap Data:
HPE Insight Management Agents for Servers for Windows 347