EasyManua.ls Logo

HPE ProLiant Gen9

HPE ProLiant Gen9
460 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
sysName
cpqHoTrapFlags
cpqSsBoxSidePanelStatus
Supporting SNMP Trap Description: “Side panel is re-installed on unit.”
NT Event ID: 1104 (Hex)0x84350450 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Fault Tolerant Power Supply Degraded.
Log Message: The fault tolerant power supply in the %6 %7 storage system connected to SCSI bus %5 of the
controller in slot %4 has a degraded status. Restore power or replace any failed power supply.
SNMP Trap: cpqSs4PwrSupplyDegraded - 8015 in CPQSTSYS.MIB
Symptom: A storage system power supply status has been set to degraded.
User Action: Restore power or replace any failed storage system power supply.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqSsBoxFltTolPwrSupplyStatus
Supporting SNMP Trap Description: “A storage system power supply unit has become degraded.”
NT Event ID: 1107 (Hex)0xc4350453 (cpqstmsg.dll)
Log Severity: Error (3)
Event Title: SCSI Tape Drive Status Change.
Log Message: The tape drive with SCSI target %6 connected to SCSI bus %5 of the controller in slot %4 has
a new status of %2.
SNMP Trap: cpqTape4PhyDrvStatusChange - 5016 in CPQSCSI.MIB
Symptom: Tape Drive Status Change. The Storage Agent has detected a change in the status of a Tape drive.
The current physical drive status is indicated in the cpqTapePhyDrvStatus variable.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqTapePhyDrvCntlrIndex
cpqTapePhyDrvBusIndex
cpqTapePhyDrvScsiIdIndex
cpqTapePhyDrvStatus
Supporting SNMP Trap Description: “Status is now [cpqTapePhyDrvStatus].”
NT Event ID: 1119 (Hex)0x8435045f (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Drive Head Needs Cleaning.
HPE Insight Management Agents for Servers for Windows 349

Table of Contents

Other manuals for HPE ProLiant Gen9

Related product manuals