HPE ProLiant Gen9 - Page 372

• cpqFcTapeDriveSerialNumber
• cpqFcTapeDriveLocation
Supporting SNMP Trap Description: “Cleaning is needed for tape drive.”
NT Event ID: 1195 (Hex)0x843504ab (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: External Tape Drive Replace Cleaning Tape.
Log Message: The cleaning tape in the tape drive at location “%4” needs to be replaced.
SNMP Trap: cpqExtTapeDriveCleanTapeReplace - 16025 in CPQFCA.MIB
Symptom: External Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader
tape unit has a cleaning tape that has been fully used and therefore needs to be replaced with a new cleaning
tape.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeDriveCntlrIndex
• cpqFcTapeDriveScsiBus
• cpqFcTapeDriveScsiTarget
• cpqFcTapeDriveScsiLun
• cpqFcTapeDriveModel
• cpqFcTapeDriveFWRev
• cpqFcTapeDriveSerialNumber
• cpqFcTapeDriveLocation
Supporting SNMP Trap Description: “Cleaning tape needs replacing.”
NT Event ID: 1196 (Hex)0x843504ac (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Recovery Server Option Status Change.
Log Message: Storage system “%4” has a new RSO status of %5.
SNMP Trap: cpqSsExRecoveryServerStatusChange - 8025 in CPQSTSYS.MIB
Symptom: Storage System Recovery Server Option Status Change. The agent has detected a change in the
recovery server option status of a storage system. The variable cpqSsChassisRsoStatus indicates the current
status.
User Action: If the RSO status is noSecondary(6) or linkDown(7), Be sure that the secondary server is
operational and that all cables are connected properly. If the RSO status is secondaryRunningAuto(8) or
secondaryRunningUser(9), examine the primary server for failed components.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
372 HPE Insight Management Agents for Servers for Windows