HPE ProLiant Gen9

Log Message: The NIC Management Agent cannot generate Traps due to a communication problem with the
NIC SNMP extension agent.
Event identifier: cpqnimsg.dll - 275 (Hex)0x44350113 (Service Event)
Log Severity: Information (1)
Log Message: Communication with the NIC SNMP extension agent has been restored. TRAPS can now be
sent.
Event identifier: cpqnimsg.dll - 276 (Hex)0x84350114 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent cannot communicate with the Token Ring Protocol driver
(CNMPROT.SYS).
Event identifier: cpqnimsg.dll - 277 (Hex)0x44350115 (Service Event)
Log Severity: Information (1)
Log Message: The NIC Management Agent version %1 has started.
Event identifier: cpqnimsg.dll - 279 (Hex)0x84350117 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent could not set an event. The data contain the error code.
Event identifier: cpqnimsg.dll - 280 (Hex)0x84350118 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent service could not start any agents successfully.
Event identifier: cpqnimsg.dll - 281 (Hex)0x84350119 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent main thread did not terminate properly. The data contain the error
code.
Event identifier: cpqnimsg.dll - 283 (Hex)0x8435011b (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent did not respond to a request. The data contain the error code.
Event identifier: cpqnimsg.dll - 285 (Hex)0x8435011d (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent could not get the system type. The data contain the error code.
Event identifier: cpqnimsg.dll - 287 (Hex)0x8435011f (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Agent service could not load the module “%1”. The data contain the error code.
Event identifier: cpqnimsg.dll - 288 (Hex)0x84350120 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Agent service could get the control function for module “%1”. The data contain the
error code.
Event identifier: cpqnimsg.dll - 290 (Hex)0x84350122 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Agent service could not start agent “%1”. The data contain the error code.
Event identifier: cpqnimsg.dll - 291 (Hex)0x84350123 (Service Event)
448 HPE Insight Management Agents for Servers for Windows