HPE ProLiant Gen9 - Page 98

379-NVDIMM Error – Processor X, DIMM Y
Symptom
379-NVDIMM Error – Processor X, DIMM Y. NVDIMM is configured for a different processor type. NVDIMM
has been disabled. Action: Sanitize the NVDIMM.
Cause
The does not match the original in which the NVDIMM was used, and NVDIMM-N Memory Interleaving is
disabled.
Action
1. Copy data from the NVDIMM to a storage device or another NVDIMM.
2. Remove the processor and replace it with the previously installed processor type.
3. Restore data to the NVDIMM.
4. If the error persists, sanitize the NVDIMM. The data on the NVDIMM will not be available after sanitization.
For more information, see the HPE 8GB NVDIMM User Guide on the Hewlett Packard Enterprise
website. For removal and replacement procedures, see the maintenance and service guide on the
Hewlett Packard Enterprise website.
380-NVDIMM Error – Processor X, DIMM Y
Symptom
380-NVDIMM Error – Processor X, DIMM Y. NVDIMM location changed. All NVDIMMs on Processor X are
disabled. Action: Install NVDIMM in Processor A, DIMM B or sanitize all NVDIMMs on Processor X.
Solution 1
Cause
The NVDIMM was moved or installed in the wrong location, and NVDIMM-N Memory Interleaving is enabled.
Action
Install the NVDIMM in Processor A, DIMM B to preserve data.
For more information, see the HPE 8GB NVDIMM User Guide on the Hewlett Packard Enterprise website.
Solution 2
Action
Sanitize all NVDIMMs on Processor X. The data on the NVDIMM will not be available after sanitization.
For more information, see the HPE 8GB NVDIMM User Guide on the Hewlett Packard Enterprise website.
381-NVDIMM Error – Processor X, DIMM Y
Symptom
381-NVDIMM Error – Processor X, DIMM Y. NVDIMM location changed. NVDIMM has been disabled. Action:
Install NVDIMM in Processor A, DIMM B or sanitize the NVDIMM.
98 379-NVDIMM Error – Processor X, DIMM Y