EasyManua.ls Logo

Huawei quidway s7700 - Page 190

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CE3 GigabitEthernet1/0/0 VLANIF 40 10.3.1.1/24
CE4 GigabitEthernet1/0/0 VLANIF 50 10.4.1.1/24
Configuration Roadmap
The configuration roadmap is as follows:
1. Configure VPN instances on the PEs connected to CEs on the backbone network and bind
related VPNs to the interfaces connected to the CEs.
2. Configure OSPF on the PEs and P to implement interconnection between PEs.
3. Configure the basic MPLS capabilities and LDP and create an MPLS LSP.
4. Configure MP-IBGP for exchanging routing information between the VPNs.
5. Configure EBGP for exchanging VPN routing information between the CE and PE.
Data Preparation
To complete the configuration, you need the following data:
l IDs of the VLANs that the interfaces belong to, as shown in Figure 3-3
l IP address of each VLAN interface, as shown in Figure 3-3
l MPLS LSR-IDs of PE and P
l RDs of vpna and vpnb
l VPN targets of received and sent routes of vpna and vpnb
Procedure
Step 1 Configure IGP on the MPLS backbone network so that PEs and P can interwork.
# Configure PE1.
<Quidway> system-view
[Quidway] sysname PE1
[PE1] interface loopback 1
[PE1-LoopBack1] ip address 1.1.1.9 32
[PE1-LoopBack1] quit
[PE1] vlan batch 10 20 30
[PE1] interface gigabitethernet 1/0/0
[PE1-GigabitEthernet1/0/0] port hybrid pvid vlan 10
[PE1-GigabitEthernet1/0/0] port hybrid untagged vlan 10
[PE1-GigabitEthernet1/0/0] quit
[PE1] interface gigabitethernet 2/0/0
[PE1-GigabitEthernet2/0/0] port hybrid pvid vlan 20
[PE1-GigabitEthernet2/0/0] port hybrid untagged vlan 20
[PE1-GigabitEthernet2/0/0] quit
[PE1] interface gigabitethernet 3/0/0
[PE1-GigabitEthernet3/0/0] port hybrid pvid vlan 30
[PE1-GigabitEthernet3/0/0] port hybrid untagged vlan 30
[PE1-GigabitEthernet3/0/0] quit
[PE1] interface vlanif 30
[PE1-Vlanif30] ip address 172.1.1.1 24
[PE1-Vlanif30] quit
[PE1] ospf
[PE1-ospf-1] area 0
[PE1-ospf-1-area-0.0.0.0] network 172.1.1.0 0.0.0.255
[PE1-ospf-1-area-0.0.0.0] network 1.1.1.9 0.0.0.0
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
175

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals