EasyManua.ls Logo

Huawei quidway s7700 - Page 390

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[PE1] display ipv6 vpn6-instance verbose
Total VPN6-Instances configured : 2
VPN6-Instance Name and ID : vpna, 1
Create date : 2009/05/17 15:38:28 UTC-08:00
Up time : 0 days, 00 hours, 07 minutes and 34 seconds
Route Distinguisher : 100:1
Export VPN Targets : 22:22
Import VPN Targets : 33:33
Label policy : label per route
Log Interval : 5
Interfaces : Vlanif100
VPN6-Instance Name and ID : vpnb, 2
Create date : 2009/05/17 15:40:18 UTC-08:00
Up time : 0 days, 00 hours, 05 minutes and 44 seconds
Route Distinguisher : 200:1
Export VPN Targets : 44:44
Import VPN Targets : 55:55
Label policy : label per route
Log Interval : 5
Interfaces : Vlanif101
[PE1] ping ipv6 vpn6-instance vpna 2001::1
PING 2001::1 : 56 data bytes, press CTRL_C to break
Reply from 2001::1
bytes=56 Sequence=1 hop limit=64 time = 47 ms
Reply from 2001::1
bytes=56 Sequence=2 hop limit=64 time = 31 ms
Reply from 2001::1
bytes=56 Sequence=3 hop limit=64 time = 62 ms
Reply from 2001::1
bytes=56 Sequence=4 hop limit=64 time = 62 ms
Reply from 2001::1
bytes=56 Sequence=5 hop limit=64 time = 31 ms
--- 2001::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/46/62 ms
Step 6 Establish the VPNv6 peer relation between PE1 and PE2.
# Configure BGP on PE1.
[PE1] bgp 100
[PE1-bgp] peer 3.3.3.9 as-number 100
[PE1-bgp] peer 3.3.3.9 connect-interface loopback 1
[PE1-bgp] ipv6-family vpnv6
[PE1-bgp-af-vpnv6] peer 3.3.3.9 enable
[PE1-bgp-af-vpnv6] quit
# Configure BGP on PE2.
[PE2] bgp 100
[PE2-bgp] peer 1.1.1.9 as-number 100
[PE2-bgp] peer 1.1.1.9 connect-interface loopback 1
[PE2-bgp] ipv6-family vpnv6
[PE2-bgp-af-vpnv6] peer 1.1.1.9 enable
[PE2-bgp-af-vpnv6] quit
After the preceding configurations are complete, run the display bgp vpnv6 all peer command
on a PE to view the status of VPNv6 peer relation. Take the display on PE1 as an example.
[PE1] display bgp vpnv6 all peer
BGP local router ID : 1.1.1.9
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State PrefRcv
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 4 BGP MPLS IPv6 VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
375

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals