Hypertherm Powermax65 SYNC - Plasma power supply interior, front

Service Parts
2
24 810440 Service Parts and Procedures Powermax65/85 SYNC
Plasma power supply interior, front
For replacement procedures, refer to the following:
 Replace the control PCB and the ribbon cable on page 96
 Replace the work lead receptacle on page 69
 Replace the torch quick-disconnect receptacle on page 71
Item
Part
number
Description and kit contents
1 528026 Kit: Control PCB and adjustment knob
141472 Control PCB
108797 Adjustment knob
075418 Screw: #4 X 1/4, pan head (3)
2 428068 Kit: Ribbon cable for control PCB, 14 cm (5.5 inches)
223024 Ribbon cable that connects the control PCB to the DSP PCB
3 428070 Kit: Powermax65/85 SYNC work lead receptacle
228364 Work lead receptacle
4 528024 Kit: Powermax65/85 SYNC torch quick-disconnect receptacle
229884 Torch quick-disconnect receptacle housing
015920 Torch quick-disconnect receptacle
075899 Retention nut
075693 Screw: #6 X 1/2, pan head (4)
108076 Grommet
3
1
1
4
2
3
5
2
4