IEMCA Smart 320 Tp - 7.2.3 Lubricating oil - Change; 7.2.4 Air filter unit - Check

7 - BAR FEEDER MAINTENANCE SMART320
EN
7 - Pag. 5 / 6
7.2.3 Lubricating oil - Change
WARNING – CAUTION:
wear personal protections according to the regulations in force.
INFORMATION:
keep drain oil in suitable containers and deliver it to companies specialized in
the storage and disposal of polluting waste products.
Avoid environmental pollution.
• Drain the tank using an auxiliary pump. Clean the tank bottom and the pump suction system.
• For the loading, pour the oil directly in the tank and check the level through the indicator
(A).
See paragraph “Technical Data” in Chap. 2, for the comparative table and the required
quantities.
7.2.4 Air filter unit - Check
FILTER A
• Make sure that cup (B) is not full of condensate.
Drain the condensate by means of valve (C), if
necessary.
• Check pressure switch adjustment, see
paragraph "Pressure switch – Adjustment”,
Chap. 5.