IEMCA Smart 320 Tp - 9.4 RECOMMENDED SPARE PARTS
; 9.5 Machine dismantling

9 - PART REPLACEMENT SMART320
EN
9 - Pag. 5 / 6
9.4 RECOMMENDED SPARE PARTS
The parts subject to wear or easily breakable parts are listed below (for a period of two years,
normal use of the bar feeder).
For spare parts, please contact our Customer Service.
Model Name Features Notes Qty
Feeding chain 1
Connecting link 1
Limit switch
BERO 3RG4012-
0AG33 SIEMENS
1
Limit switch
BERO 3RG4012-
0AG07 SIEMENS
3
Bar pusher
Specify diameter
and length
1
Revolving tip Specify diameter 1
Collet
Specify inside and
outside diameter
1
Battery
Stack 3 Volt
VARTA CR2032
handheld and fixed
keyboard
1
SMART 320
Battery Stack 3,6 Volt For PLC Arteco 1
9.5 Machine dismantling
This operation is to be carried out by expert operators, according to the safety at work
regulations in force.
Do not throw non-biodegradable products, lubricating oils and non-ferrous components (rubber,
PVC, resins, etc.) in the environment.
Dispose of the same according to the regulations in force.