IEMCA Smart 320 Tp - 2.8 DEVICE FOR SLIDING HEADSTOCK LATHES - FOREWORD; 2.8.1 Bar;headstock synchronizing device - Description

2 - TECHNICAL INFORMATION SMART320
EN
2 - Pag. 17 / 20
2.8 DEVICE FOR SLIDING HEADSTOCK LATHES - FOREWORD
This feeder has been designed and manufactured to be coupled to sliding headstock lathes too.
To do this, special devices are available which are listed and then described below.
2.8.1 Bar/headstock synchronizing device - Description
It is used to connect the bar-pusher (and
consequently, the bar) to the lathe headstock, to
obtain their synchronized forwards/backwards
movement.