IEMCA Smart 320 Tp - 6 USE AND OPERATION SMART320

6 - USE AND OPERATION SMART320
EN
6 - Pag. 1 / 22
INDEX
6.1 CONTROL DESCRIPTION..........................................................................................2
6.2 KEYBOARD CONTROL DESCRIPTION.........................................................................5
6.3 LIGHT INDICATOR DESCRIPTION.............................................................................8
6.4 BARS TO BE MACHINED - FEATURES AND PREPARATION..........................................8
6.4.1 BARS TO BE MACHINED – LOADED BARS..................................................................9
6.4.2 BARS TO BE MACHINED - PIPES...............................................................................9
6.4.3 BAR STRAIGHTNESS - Measurement.......................................................................10
6.5 BAR FEEDER SET-UP AND AUTOMATIC CYCLE START..............................................12
6.5.1 Bar magazine - Filling.............................................................................................13
6.5.2 Lubrication oil - Flow adjustment ............................................................................14
6.5.3 Automatic cycle start..............................................................................................15
6.5.4 Guide channel opening/closing procedure................................................................17
6.5.5 Mode of performing a cycle in the STEP BY STEP function ........................................18
6.6 BAR FEEDER STOP.................................................................................................19
6.7 AXIS CALIBRATION PROCEDURE............................................................................20
6.8 MACHINING CHANGE - QUICK GUIDE ..............................................................21
6.8.1 Machining type change with guide channel change ..................................................21
6.8.2 Machining type change without guide change..........................................................22