4 - HANDLING AND INSTALLATION SMART320
EN
4 - Pag. 3 / 26
4.1 PACKAGING
There are three possible bar feeder packaging:
A WITHOUT PACKAGING.
B WITH PALLET: the bar feeder is placed on a pallet and wrapped with protective film.
C WITH CRATE: the bar feeder is contained in a crate and wrapped with protective film.
4.2 LIFTING
DANGER - WARNING:
handling and lifting operations should be carried out with suitable equipment
(see weight table in "Technical data”, Chap.2) and by specially trained and
experienced personnel.
According to the packaging choice, lifting is carried out as shown in the next page.
To Next Page
Loading...
