IEMCA Smart 320 Tp - 5 ADJUSTMENT AND SETUP SMART320

5 - ADJUSTMENT AND SETUP SMART320
EN
5 - Pag. 1 / 20
INDEX
5.1 ADJUSTMENT AND SETUP - FOREWORD ............................................................2
5.2 GENERAL ADJUSTMENTS - FOREWORD ..............................................................2
5.2.1 Feeding chain - Adjustment......................................................................................2
5.2.2 Pressure switch - Adjustment....................................................................................3
5.3 SET-UP ACCORDING TO THE BAR TO BE MACHINED.................................................4
5.3.1 Guide channels, half-bushings, bar pusher and collet - Replacement ...........................7
5.3.2 Bar guide plates - Adjustment.................................................................................13
5.3.3 BAR PUSHER REPLACEMENT PROCEDURE...............................................................15
5.4 CAM BOX - TIMING................................................................................................17