EN
6 - USE AND OPERATION SMART320
6 - Pag. 6 / 22
10 Multifunction
- Sets the numerical value.
- Turns on/off the oil pump.
Press to turn on the pump and press again to
turn it off.
11 Multifunction
- Sets the numerical value.
- Loads the program from the PLC (entering
default values in the parameters)
12 Multifunction
- Moves the bar pusher fast in manual mode.
- Sets the numerical value.
13 Multifunction
- Allows scrolling the page downwards.
- Moves the selection cursor downwards.
14 Multifunction
- Selects the previous parameter.
- Moves the selection cursor rightwards.
15 Opens and closes the clamps in manual mode.
Press to close and press again to open.
To Next Page
Loading...
