IMO HD2-3.7A-43 - Page 212

HD2 Series Inverter Function Parameter List
-203-
Function
code
Name
Description
Default
value
Modify
voltage regulator
during
undervoltage stall
undervoltage stall.
Setting range: 0–1000
P11.18
Integral
coefficient of
voltage regulator
during
undervoltage stall
This parameter is used to set the integral
coefficient of the bus voltage regulator during
undervoltage stall.
Setting range: 0–1000
40
○
P11.19
Proportional
coefficient of
current regulator
during
undervoltage stall
This parameter is used to set the proportional
coefficient of the active current regulator during
undervoltage stall.
Setting range: 0–1000
25
○
P11.20
Integral
coefficient of
current regulator
during
undervoltage stall
This parameter is used to set the integral
coefficient of the active current regulator during
undervoltage stall.
Setting range: 0–2000
150
○
P11.21
Proportional
coefficient of
voltage regulator
during
overvoltage stall
This parameter is used to set the proportional
coefficient of the bus voltage regulator during
overvoltage stall.
Setting range: 0–1000
60
○
P11.22
Integral
coefficient of
voltage regulator
during
overvoltage stall
This parameter is used to set the integral
coefficient of the bus voltage regulator during
overvoltage stall.
Setting range: 0–1000
10
○
P11.23
Proportional
coefficient of
current regulator
during
overvoltage stall
This parameter is used to set the proportional
coefficient of the active current regulator during
overvoltage stall.
Setting range: 0–1000
60
○
P11.24
Integral
coefficient of
current regulator
during
overvoltage stall
This parameter is used to set the integral
coefficient of the active current regulator during
overvoltage stall.
Setting range: 0–2000
250
○