Intel SC5650BCDP Technical Product Specification

Intel
®
Server Board S5500BC TPS Appendix B: Sensor Tables
Revision 1.8 Intel order number: E42249-009 125
 Event Data
This is the data included in an event message generated by the associated sensor. For
threshold-based sensors, these abbreviations are used:
R: Reading value
T: Threshold value
 Rearm Sensors
The rearm is a request for the event status for a sensor to be rechecked and updated
upon a transition between good and bad states. You can rearm the sensors can be done
manually or automatically. This column indicates the type supported by the sensor. The
following abbreviations are used in the comment column to describe a sensor:
A: Auto-rearm
M: Manual rearm
I: Rearm by init agent
 Default Hysteresis
Hysteresis setting applies to all thresholds of the sensor. This column provides the count
of hysteresis for the sensor, which can be 1 or 2 (positive or negative hysteresis).
 Criticality
Criticality is a classification of the severity and nature of the condition. It also controls the
behavior of the Control Panel Status LED.
 Standby
Some sensors operate on standby power. These sensors may be accessed and / or
generate events when the main (system) power is off, but AC power is present.

Intel SC5650BCDP Specifications

General

Brand	Intel
Model	SC5650BCDP
Category	Server
Language	English