BIOS Setup Utility Intel
®
Server Board S5500BC TPS
Intel order number: E42249-009 Revision 1.8
Disabled / Serial Port A / Serial Port B
9.6k / 19.2k / 38.4k / 57.6k / 115.2k
PC-ANSI / VT100 / VT100+ / VT-UTF8
Figure 31. Setup Utility — Console Redirection Screen Display
Table 28. Setup Utility — Console Redirection Configuration Fields
Disabled
Serial Port A
Serial Port B
Console redirection allows a serial port to be used for
server management tasks.
[Disabled] - No console redirection.
[Serial Port A] - Configure serial port A for console
redirection.
[Serial Port B] - Configure serial port B for console
redirection.
Enabling this option disables the display of the Quiet
Boot logo screen during POST.
Flow control is the handshake protocol.
Setting must match the remote terminal application.
[None] - Configure for no flow control.
[RTS/CTS] - Configure for hardware flow control.
9600
19.2K
38.4K
57.6K
115.2K
Serial port transmission speed. Setting must match
the remote terminal application.
PC-ANSI
VT100
VT100+
VT-UTF8
Character formatting used for console redirection.
Setting must match the remote terminal application.
This option enables legacy OS redirection (i.e., DOS)
on serial port. If it is enabled, the associated serial
port is hidden from the legacy OS.
5.3.2.5 Server Management System Information Screen
The Server Management System Information screen allows the user to view part numbers,
serial numbers, and firmware revisions.