Intel
®
RAID Software User’s Guide 139
Another method to use the BBU operations is to right-click the BBU icon to open the
operations menu and select Start Learn Cycle.
Monitoring Rebuilds and Other Processes
The Intel
®
RAID Web Console 2 allows you to monitor the progress of rebuilds and other
lengthy processes in the Group Show Progress window, shown in Figure 88. You open this
window by selecting Manage -> Show Progress.
Figure 88. Group Show Progress Window
Operations on virtual disks appear in the left panel of the window, and operations on physical
drives appear in the right panel. The types of operations that appear in this window are as
follows:
• Initialization of a virtual disk (see “Initializing a Virtual Disk” on page 140).
• Rebuild (see “Rebuilding a Drive” on page 142).
• Reconstruction (see “Adding a Drive to a Virtual Disk” on page 120).
• Consistency check (see “Running a Consistency Check” on page 141).
Note: A Reconstruction process cannot be aborted. To abort any other ongoing process, click Abort next
to the status indicator. Click Abort All to abort all ongoing processes. Click Close to close the
window.
To Next Page
Loading...
Need help?
General
