Intel
®
RAID Software User’s Guide 145
• It is 100% transparent to storage systems and end users; appears the same as traditional
non-encrypting drives; operates at full drive speed - No impact to performance;
automatically encrypts or decrypts all data.
The following steps describe the steps to use Full Disk Encryption feature:
• Enable this feature within the Intel
®
RAID Web Console 2.
• Build a logical volume containing Self-Encrypting Disks.
• Specify that the volume be secured.
Detailed steps are as below:
1. Select the RAID controller and choose Physical tab in the left panel of Intel
®
RAID
Web Console 2. Check Drive Security Properties in the right panel to see whether the
RAID controller is Drive Security capable.
Figure 93. Check Controller Security status
2. Select the physical drive and choose Physical tab in the left panel of Intel® RAID Web
Console 2. Check Drive Security Properties in the right panel to see whether the
RAID controller is Full Disk Encryption capable.
To Next Page
Loading...
Need help?
General
