Intel SC5650BCDP

Intel
®
RAID Software User’s Guide 175
Appendix B: Events and Messages
This appendix lists the Intel
®
RAID Web Console 2 events that may display in the event log.
The Intel
®
RAID Web Console 2 monitors the activity and performance of all controllers in the
server and the devices attached to them. When an “event” such as the completion of a
consistency check or the removal of a physical drive occurs, an event message is displayed in
the log displayed at the bottom of the Intel
®
RAID Web Console 2 screen. The messages are
also logged in the Microsoft Windows* Application log (Event Viewer). Error event levels
are:
• Progress: This is a progress posting event. Progress events are not saved in NVRAM.
• Info: Informational message. No user action is necessary.
• Warning: Some component may be close to a failure point.
• Critical: A component has failed, but the system has not lost data.
• Fatal: A component has failed, and data loss has occurred or will occur.
• Dead: A catastrophic error has occurred and the controller has died. This is seen only
after the controller has been restarted.
The following table lists all of the Intel
®
RAID Web Console 2 event messages.