Intel SC5650BCDP

Intel
®
RAID Software User’s Guide 177
32 Dead Multi-bit ECC error: ECAR=%x
33 Warning Single-bit ECC error: ECAR=%x
34 Dead Not enough controller memory
35 Info Patrol Read complete
36 Info Patrol Read paused
37 Info Patrol Read Rate changed to %d%%
38 Info Patrol Read resumed
39 Info Patrol Read started
40 Info Rebuild rate changed to %d%%
41 Info Reconstruction rate changed to %d%%
42 Info Shutdown command received from host
43 Info Test event: ’%s’
44 Info Time established as %s; (%d seconds since power on)
45 Info User entered firmware debugger
46 Warning Background Initialization aborted on %s
47 Warning Background Initialization corrected medium error (%s at %lx
48 Info Background Initialization completed on %s
49 Fatal Background Initialization completed with uncorrectable errors on %s
50 Fatal Background Initialization detected uncorrectable double medium errors
(%s at %lx on %s)
51 Critical Background Initialization failed on %s
52 Progress Background Initialization progress on %s is %s
53 Info Background Initialization started on %s
54 Info Policy change due to BBU on %s from %s to %s
55 Info Policy change due to user on %s from %s to %s
56 Warning Consistency Check aborted on %s
57 Warning Consistency Check corrected medium error (%s at %lx
58 Info Consistency Check done on %s
59 Info Consistency Check done with corrections on %s
60 Fatal Consistency Check detected uncorrectable double medium errors (%s at
%lx on %s)
61 Critical Consistency Check failed on %s
62 Fatal Consistency Check failed with uncorrectable data on %s
63 Warning Consistency Check found inconsistent parity on %s at strip %lx
Number Type Description