Intermec EasyCoder PC4 - LE - Line Draw Exclusive

Chapter 7 — Commands
ESim for the PC4 and PF8 Printer Programmer’s Reference Manual 87
Example 1:
This example shows the adjustment for peel-off operation at 8
dots/mm.
j110 
Example 2:
This example shows the adjustment for peel-off operation at 8
dots/mm.
j136 
LE - Line Draw Exclusive
Purpose: This command is used to draw black lines where the line needs to
be white when intersecting a black area or object or black when
intersecting a white object or area.
Syntax: LEp
1
,p
2
,p
3
,p
4
LF Command Parameter Descriptions
Parameter Description
p
1
Horizontal start position (X) in dots.
p
2
Vertical start position (Y) in dots.
p
3
Horizontal length in dots
p
4
Vertical length in dots