Intermec EasyCoder PC4 Programmer's Reference Manual

ESim for the PC4 and PF8 Printer Programmer’s Reference Manual 135
9
Code Pages
This chapter contains tables of the characters available in the
various code pages for the printer-resident fonts. For more help,
see “I - Character Selection” on page 81.
For examples of the actual appearance of the characters, see
“Fonts” on page 131.
For information on and printout samples of Asian fonts, please
refer to your printer user's manual.
Note: When using 7-bit communication, only the characters
between ASCII 0 decimal and ASCII 127 decimal can be used.

Intermec EasyCoder PC4 Specifications

General

Resolution	203 dpi
Power Requirements	100-240 VAC, 50-60 Hz
Print Method	Direct Thermal
Max Print Width	4.09 inches (104 mm)
Max Print Speed	4 inches per second
Max Print Length	39 inches
Media Type	Roll-fed, die-cut, continuous, fanfold, tags, tickets
Media Width	1.0 - 4.65 inches
Media Thickness	0.06 mm (0.00236 in) to 0.18 mm (0.00708 in)
Interface	RS-232
Memory	4 MB Flash, 8 MB SDRAM
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	10 to 90% non-condensing