Chapter 8 — Fonts
132 ESim for the PC4 and PF8 Printer Programmer’s Reference Manual
Resident Fonts
The PF8 printers support uppercase and lowercase characters for
font sizes 1-4 and uppercase characters for font size 5. All fonts
are non-proportional. The ASCII value of the different characters
is determined by the I command setting. For more help, see “I -
Character Selection” on page 81
203.2 dpi (8 dots/mm) (Illustrated in Chapter 8 and 9)
Font Size (dots) Size (points) Characters/inch
1 8 x 12 6 20.3
2 10 x 16 7 16.9
3 12 x 20 10 14.5
4 14 x 24 12 12.7
5 32 x 48 24 5.6
300 dpi (8 dots/mm) (Not Illustrated)
Font Size (dots) Size (points) Characters/inch
1 12 x 20 4 25
2 16 x 28 6 18.75
3 20 x 36 8 15
4 24 x 44 10 12.5
5 48 x 80 214 6.25
To Next Page
Loading...
