Intermec EasyCoder PC4 - PF - Feed Media

Chapter 7 — Commands
ESim for the PC4 and PF8 Printer Programmer’s Reference Manual 97
Remarks: Refer to the P command for explanations on how to print
multiple labels with counters. The PA command follows the
same principles.
Example:
FK“TEST6” 
FS“TEST6” 
V00,59,N,“Enter text” 
A24,24,0,4,1,1,N,V00 
PA1 
FE 
FR“TEST6” 
? 
This is variable text
PF - Feed Media
Purpose: This command is used to feed the media forward or backward a
given length.
Syntax: PFp
1
[,p
2
[,p
3
]]
The PA command can only be used with forms containing at
least one variable (see V command). If there is no variable in
the form, the printer enters an endless loop and prints
continuously.